Three transfer-film PUA grades with properties taken from the dedicated transfer-film document.
Source: supplied transfer-film waterborne resin document.
| Model | Designation | Solids | Appearance | pH | Viscosity | Modulus | Documented features | Application |
|---|---|---|---|---|---|---|---|---|
| 5170 | PUA emulsion | 35±2% | Milky white liquid | 7-9 | 100-800 mPa·s | Approx. 3 | Low-modulus PUA with a soft, extensible film and metal-foil adhesion | Sealer coats for tin foil, aluminum foil and similar substrates (gravure or roller coating) |
| 5180 | PUA emulsion | 35±2% | Milky white liquid | 7-9 | 100-800 mPa·s | Approx. 8 | Medium-modulus PUA balancing flexibility, cohesion and foil adhesion | Sealer coats for tin foil, aluminum foil and similar substrates (gravure or roller coating) |
| 5190 | PUA emulsion | 35±2% | Milky white liquid | 7-9 | 100-800 mPa·s | Approx. 14 | Higher-modulus PUA with hardness, block resistance and foil adhesion | Sealer coats for tin foil, aluminum foil and similar substrates (gravure or roller coating) |
Review the current resins around the carrier, film formation, transfer process and final substrate.
Identify the carrier film or release material and the actual substrate after transfer.
Specify the resin layer, film-formation method, transfer and release conditions.
Describe softness, elasticity, gloss, transparency or coverage targets.
Share supporting materials, coating and drying conditions, transfer completeness, adhesion and end-use test requirements.
Provide the carrier, final substrate, coating structure and transfer sequence before comparing resin data. The application name alone does not establish suitability.
Compare candidates with the same carrier, coating weight and drying conditions, then inspect film appearance, completeness and hand feel in the actual transfer process.
Provide carrier and substrate samples, target effect, coating sequence, process temperature, supporting materials and required tests.
These entries follow the current product groups above. Open a group to view its product details.
This industry page lists 3 models; 3 have existing TDS downloads. The list is generated from current product links.
Files retain their existing version and language. Contact FAST for another language, the latest version or additional technical documentation. Discuss your project →
Selection guidance supports initial screening. Validate final suitability against the actual substrate, formulation, process and test requirements.
Start with this industry, then refine by substrate, product type and performance targets, or share your project conditions with FAST.