Browse the five wood-coating emulsion grades in the supplied document. The model table below is the current list for this application.
Five grades from the supplied wood-coating overview. Values are typical. The document describes these waterborne products as low VOC without grade-specific test data, so no certification claim is made here. RU-5972 is intended for a two-component system; verify formulation compatibility.
| Model | Chemistry | Solids | Tg °C | MFFT °C | Viscosity mPa·s | pH | Documented direction |
|---|---|---|---|---|---|---|---|
| RU-5971 | Aliphatic polyurethane dispersion | 48±2% | ~25 | <5 | 300-1000 | 7.0-8.5 | Flexible polyester PUD for wood primer and flexible finish; low-temperature film formation |
| RU-5972 | Hydroxyl-functional polyurethane dispersion | 48±2% | ~45 | ~20 | 300-1000 | 7.5-8.5 | Hydroxyl-functional polyester PUD for two-component clear or pigmented finishes |
| 2016 | Styrene-acrylic copolymer emulsion | 48±2% | ~22 | ~15 | 300-1000 | 7.5-8.5 | Styrene-acrylic primer with fine particles and low wood-grain raising |
| 2017 | Self-crosslinking acrylic emulsion | 48±2% | ~40 | ~25 | 300-1000 | 7.5-9.0 | Self-crosslinking acrylic for sandable wood and floor finishes |
| 2018 | Self-crosslinking acrylic emulsion | 48±2% | ~55 | ~35 | 300-1000 | 7.5-9.0 | Self-crosslinking acrylic for hard, scratch-resistant clear finishes |
Compare the current wood-coating emulsions by wood substrate, coating layer, formulation system and application conditions.
Identify wood species or panel, surface preparation and any existing coating.
Specify primer or topcoat, clear or pigmented finish, gloss and feel targets.
Distinguish one- and two-component systems; describe additives, crosslinker and compatibility requirements.
Share application and drying conditions with adhesion, hardness, water or scratch test requirements.
For a primer, describe substrate preparation and intercoat compatibility. For a topcoat, define appearance and surface performance. Test both within the complete coating structure.
Confirm the system described in the product information, then check formulation, supporting components and process conditions. Similar solids content alone does not establish interchangeability.
Compare product parameters with actual film-formation, drying and application conditions. Typical values support initial screening and do not replace finished-coating tests.
These entries follow the current product groups above. Open a group to view its product details.
This industry page lists 5 models; 5 have existing TDS downloads. The list is generated from current product links.
Files retain their existing version and language. Contact FAST for another language, the latest version or additional technical documentation. Discuss your project →
Selection guidance supports initial screening. Validate final suitability against the actual substrate, formulation, process and test requirements.
Start with this industry, then refine by substrate, product type and performance targets, or share your project conditions with FAST.